Click on the red buttons for the specifications of the 2060 self-propelled harvester.

Hopper
Holds more than 2100 lt,and discharges at heights of up to 2800 mm.

Equalizer
Positioned inside the hopper to improve filling.

Rotatine cleaning shoe
For the hopper cover.

Driving position
The various operations are all controlled by the operator from the comfort of a seat which can be positioned hydraulically in the centre or to one side of the machine; the most important operations can also be performed using a joystick.

Steering column
Height- and tilt-adjustable, with full instrumentation for all the machine’s functions using intuitive, easy access controls.

Speed control lever
Two-speed electronic control of the engine and hydrostatic transmission improves handling of the vehicle during both driving and harvesting.

MMC® and DISPLAY
The display clearly shows all the machine’s functions managed by the MMC® electronic control system via CAN-BUS data transmission.

Large diameter pick-up
Suitable for various types of fruit, it is fitted with an automatic cleaning device and will work in the most difficult conditions.

Lateral Magnum fan
3-speed.

Triple steering system
Improves high speed handling, ensures maximum manoeuvrability on every kind of terrain, and makes moving across steep gradients much easier:

• front wheel steering for road handling
• coordinated steering for a reduced turning circle
• “crab” steering to move the machine sideways maintaining lengthwise alignment on steep gradients
  

 

Self-cleaning belt
To evacuate leaves.

Twin rear fan
Fitted with high pressure turbine, with the speed adjustable from the driving seat.

Openable pick-up
Facilitates servicing and cleaning operations

Extra large belt
As wide as 2050 mm for working with very large quantities of material.

Vibratine sieve
As wide as the belt, benefiting the flow of material.

“BHI” integrated hydraulic bloc
All the hydraulic functions in a single housing.

Radiators
Automatic removal of dust from the grid in any climate using an airflow inversion system.

Air filter
With automatic pre-separation of 95% of impurities.

Tires
Wide section, low pressure, and special design to reduce the impact with the ground to a minimum, and tackle steep climbs with no difficulty. 4 Poclain wheels drive, with automatic Twin-Lock differential locking device.

Hydraulic front bulkhead
Caters for working with large amounts of impurities.

Lateral brushes
Raised and closed hydraulically.

John Deere Euro2 “green” engine
125 cv of power at just 2200 r.p.m., with a maximum torque of 500 Nm available at as little as 1400 r.p.m.: powerful, sturdy and ecological, reducing consumption, vibrations and noise.